ಮಾಡ್ಯೂಲ್:TableTools
This Lua module is used on approximately ೨೪,೬೦,೦೦೦ pages, or roughly 1657% of all pages. To avoid major disruption and server load, any changes should be tested in the module's /sandbox or /testcases subpages, or in your own module sandbox. The tested changes can be added to this page in a single edit. Consider discussing changes on the talk page before implementing them. |
This module is subject to page protection. It is a highly visible module in use by a very large number of pages, or is substituted very frequently. Because vandalism or mistakes would affect many pages, and even trivial editing might cause substantial load on the servers, it is protected from editing. |
This module includes a number of functions for dealing with Lua tables. It is a meta-module, meant to be called from other Lua modules, and should not be called directly from #invoke.
Loading the module
[ಬದಲಾಯಿಸಿ]To use any of the functions, first you must load the module.
local TableTools = require('Module:TableTools')
isPositiveInteger
[ಬದಲಾಯಿಸಿ]TableTools.isPositiveInteger(value)
Returns true
if value
is a positive integer, and false
if not. Although it doesn't operate on tables, it is included here as it is useful for determining whether a given table key is in the array part or the hash part of a table.
isNan
[ಬದಲಾಯಿಸಿ]TableTools.isNan(value)
Returns true
if value
is a NaN value, and false
if not. Although it doesn't operate on tables, it is included here as it is useful for determining whether a value can be a valid table key. (Lua will generate an error if a NaN value is used as a table key.)
shallowClone
[ಬದಲಾಯಿಸಿ]TableTools.shallowClone(t)
Returns a clone of a table. The value returned is a new table, but all subtables and functions are shared. Metamethods are respected, but the returned table will have no metatable of its own. If you want to make a new table with no shared subtables and with metatables transferred, you can use mw.clone instead.
removeDuplicates
[ಬದಲಾಯಿಸಿ]TableTools.removeDuplicates(t)
Removes duplicate values from an array. This function is only designed to work with standard arrays: keys that are not positive integers are ignored, as are all values after the first nil
value. (For arrays containing nil
values, you can use compressSparseArray first.) The function tries to preserve the order of the array: the earliest non-unique value is kept, and all subsequent duplicate values are removed. For example, for the table {5, 4, 4, 3, 4, 2, 2, 1}
removeDuplicates will return {5, 4, 3, 2, 1}
numKeys
[ಬದಲಾಯಿಸಿ]TableTools.numKeys(t)
Takes a table t
and returns an array containing the numbers of any positive integer keys that have non-nil values, sorted in numerical order. For example, for the table {'foo', nil, 'bar', 'baz', a = 'b'}
, numKeys will return {1, 3, 4}
.
affixNums
[ಬದಲಾಯಿಸಿ]TableTools.affixNums(t, prefix, suffix)
Takes a table t
and returns an array containing the numbers of keys with the optional prefix prefix
and the optional suffix suffix
. For example, for the table {a1 = 'foo', a3 = 'bar', a6 = 'baz'}
and the prefix 'a'
, affixNums will return {1, 3, 6}
. All characters in prefix
and suffix
are interpreted literally.
numData
[ಬದಲಾಯಿಸಿ]TableTools.numData(t, compress)
Given a table with keys like "foo1", "bar1", "foo2", and "baz2", returns a table of subtables in the format { [1] = {foo = 'text', bar = 'text'}, [2] = {foo = 'text', baz = 'text'} }
. Keys that don't end with an integer are stored in a subtable named "other". The compress option compresses the table so that it can be iterated over with ipairs.
compressSparseArray
[ಬದಲಾಯಿಸಿ]TableTools.compressSparseArray(t)
Takes an array t
with one or more nil values, and removes the nil values while preserving the order, so that the array can be safely traversed with ipairs. Any keys that are not positive integers are removed. For example, for the table {1, nil, foo = 'bar', 3, 2}
, compressSparseArray will return {1, 3, 2}
.
sparseIpairs
[ಬದಲಾಯಿಸಿ]TableTools.sparseIpairs(t)
This is an iterator function for traversing a sparse array t
. It is similar to ipairs, but will continue to iterate until the highest numerical key, whereas ipairs may stop after the first nil
value. Any keys that are not positive integers are ignored.
Usually sparseIpairs is used in a generic for
loop.
for i, v in TableTools.sparseIpairs(t) do
-- code block
end
Note that sparseIpairs uses the pairs function in its implementation. Although some table keys appear to be ignored, all table keys are accessed when it is run.
size
[ಬದಲಾಯಿಸಿ]TableTools.size(t)
Finds the size of a key/value pair table. For example, for the table {foo = 'foo', bar = 'bar'}
, size will return 2
. The function will also work on arrays, but for arrays it is more efficient to use the # operator. Note that to find the table size, this function uses the pairs function to iterate through all of the table keys.
------------------------------------------------------------------------------------
-- TableTools --
-- --
-- This module includes a number of functions for dealing with Lua tables. --
-- It is a meta-module, meant to be called from other Lua modules, and should not --
-- be called directly from #invoke. --
------------------------------------------------------------------------------------
local libraryUtil = require('libraryUtil')
local p = {}
-- Define often-used variables and functions.
local floor = math.floor
local infinity = math.huge
local checkType = libraryUtil.checkType
local checkTypeMulti = libraryUtil.checkTypeMulti
------------------------------------------------------------------------------------
-- isPositiveInteger
--
-- This function returns true if the given value is a positive integer, and false
-- if not. Although it doesn't operate on tables, it is included here as it is
-- useful for determining whether a given table key is in the array part or the
-- hash part of a table.
------------------------------------------------------------------------------------
function p.isPositiveInteger(v)
return type(v) == 'number' and v >= 1 and floor(v) == v and v < infinity
end
------------------------------------------------------------------------------------
-- isNan
--
-- This function returns true if the given number is a NaN value, and false if
-- not. Although it doesn't operate on tables, it is included here as it is useful
-- for determining whether a value can be a valid table key. Lua will generate an
-- error if a NaN is used as a table key.
------------------------------------------------------------------------------------
function p.isNan(v)
return type(v) == 'number' and v ~= v
end
------------------------------------------------------------------------------------
-- shallowClone
--
-- This returns a clone of a table. The value returned is a new table, but all
-- subtables and functions are shared. Metamethods are respected, but the returned
-- table will have no metatable of its own.
------------------------------------------------------------------------------------
function p.shallowClone(t)
checkType('shallowClone', 1, t, 'table')
local ret = {}
for k, v in pairs(t) do
ret[k] = v
end
return ret
end
------------------------------------------------------------------------------------
-- removeDuplicates
--
-- This removes duplicate values from an array. Non-positive-integer keys are
-- ignored. The earliest value is kept, and all subsequent duplicate values are
-- removed, but otherwise the array order is unchanged.
------------------------------------------------------------------------------------
function p.removeDuplicates(arr)
checkType('removeDuplicates', 1, arr, 'table')
local isNan = p.isNan
local ret, exists = {}, {}
for _, v in ipairs(arr) do
if isNan(v) then
-- NaNs can't be table keys, and they are also unique, so we don't need to check existence.
ret[#ret + 1] = v
elseif not exists[v] then
ret[#ret + 1] = v
exists[v] = true
end
end
return ret
end
------------------------------------------------------------------------------------
-- numKeys
--
-- This takes a table and returns an array containing the numbers of any numerical
-- keys that have non-nil values, sorted in numerical order.
------------------------------------------------------------------------------------
function p.numKeys(t)
checkType('numKeys', 1, t, 'table')
local isPositiveInteger = p.isPositiveInteger
local nums = {}
for k in pairs(t) do
if isPositiveInteger(k) then
nums[#nums + 1] = k
end
end
table.sort(nums)
return nums
end
------------------------------------------------------------------------------------
-- affixNums
--
-- This takes a table and returns an array containing the numbers of keys with the
-- specified prefix and suffix. For example, for the table
-- {a1 = 'foo', a3 = 'bar', a6 = 'baz'} and the prefix "a", affixNums will return
-- {1, 3, 6}.
------------------------------------------------------------------------------------
function p.affixNums(t, prefix, suffix)
checkType('affixNums', 1, t, 'table')
checkType('affixNums', 2, prefix, 'string', true)
checkType('affixNums', 3, suffix, 'string', true)
local function cleanPattern(s)
-- Cleans a pattern so that the magic characters ()%.[]*+-?^$ are interpreted literally.
return s:gsub('([%(%)%%%.%[%]%*%+%-%?%^%$])', '%%%1')
end
prefix = prefix or ''
suffix = suffix or ''
prefix = cleanPattern(prefix)
suffix = cleanPattern(suffix)
local pattern = '^' .. prefix .. '([1-9]%d*)' .. suffix .. '$'
local nums = {}
for k in pairs(t) do
if type(k) == 'string' then
local num = mw.ustring.match(k, pattern)
if num then
nums[#nums + 1] = tonumber(num)
end
end
end
table.sort(nums)
return nums
end
------------------------------------------------------------------------------------
-- numData
--
-- Given a table with keys like {"foo1", "bar1", "foo2", "baz2"}, returns a table
-- of subtables in the format
-- {[1] = {foo = 'text', bar = 'text'}, [2] = {foo = 'text', baz = 'text'}}.
-- Keys that don't end with an integer are stored in a subtable named "other". The
-- compress option compresses the table so that it can be iterated over with
-- ipairs.
------------------------------------------------------------------------------------
function p.numData(t, compress)
checkType('numData', 1, t, 'table')
checkType('numData', 2, compress, 'boolean', true)
local ret = {}
for k, v in pairs(t) do
local prefix, num = mw.ustring.match(tostring(k), '^([^0-9]*)([1-9][0-9]*)$')
if num then
num = tonumber(num)
local subtable = ret[num] or {}
if prefix == '' then
-- Positional parameters match the blank string; put them at the start of the subtable instead.
prefix = 1
end
subtable[prefix] = v
ret[num] = subtable
else
local subtable = ret.other or {}
subtable[k] = v
ret.other = subtable
end
end
if compress then
local other = ret.other
ret = p.compressSparseArray(ret)
ret.other = other
end
return ret
end
------------------------------------------------------------------------------------
-- compressSparseArray
--
-- This takes an array with one or more nil values, and removes the nil values
-- while preserving the order, so that the array can be safely traversed with
-- ipairs.
------------------------------------------------------------------------------------
function p.compressSparseArray(t)
checkType('compressSparseArray', 1, t, 'table')
local ret = {}
local nums = p.numKeys(t)
for _, num in ipairs(nums) do
ret[#ret + 1] = t[num]
end
return ret
end
------------------------------------------------------------------------------------
-- sparseIpairs
--
-- This is an iterator for sparse arrays. It can be used like ipairs, but can
-- handle nil values.
------------------------------------------------------------------------------------
function p.sparseIpairs(t)
checkType('sparseIpairs', 1, t, 'table')
local nums = p.numKeys(t)
local i = 0
local lim = #nums
return function ()
i = i + 1
if i <= lim then
local key = nums[i]
return key, t[key]
else
return nil, nil
end
end
end
------------------------------------------------------------------------------------
-- size
--
-- This returns the size of a key/value pair table. It will also work on arrays,
-- but for arrays it is more efficient to use the # operator.
------------------------------------------------------------------------------------
function p.size(t)
checkType('size', 1, t, 'table')
local i = 0
for _ in pairs(t) do
i = i + 1
end
return i
end
local function defaultKeySort(item1, item2)
-- "number" < "string", so numbers will be sorted before strings.
local type1, type2 = type(item1), type(item2)
if type1 ~= type2 then
return type1 < type2
elseif type1 == 'table' or type1 == 'boolean' or type1 == 'function' then
return tostring(item1) < tostring(item2)
else
return item1 < item2
end
end
------------------------------------------------------------------------------------
-- keysToList
--
-- Returns an array of the keys in a table, sorted using either a default
-- comparison function or a custom keySort function.
------------------------------------------------------------------------------------
function p.keysToList(t, keySort, checked)
if not checked then
checkType('keysToList', 1, t, 'table')
checkTypeMulti('keysToList', 2, keySort, {'function', 'boolean', 'nil'})
end
local arr = {}
local index = 1
for k in pairs(t) do
arr[index] = k
index = index + 1
end
if keySort ~= false then
keySort = type(keySort) == 'function' and keySort or defaultKeySort
table.sort(arr, keySort)
end
return arr
end
------------------------------------------------------------------------------------
-- sortedPairs
--
-- Iterates through a table, with the keys sorted using the keysToList function.
-- If there are only numerical keys, sparseIpairs is probably more efficient.
------------------------------------------------------------------------------------
function p.sortedPairs(t, keySort)
checkType('sortedPairs', 1, t, 'table')
checkType('sortedPairs', 2, keySort, 'function', true)
local arr = p.keysToList(t, keySort, true)
local i = 0
return function ()
i = i + 1
local key = arr[i]
if key ~= nil then
return key, t[key]
else
return nil, nil
end
end
end
------------------------------------------------------------------------------------
-- isArray
--
-- Returns true if the given value is a table and all keys are consecutive
-- integers starting at 1.
------------------------------------------------------------------------------------
function p.isArray(v)
if type(v) ~= 'table' then
return false
end
local i = 0
for _ in pairs(v) do
i = i + 1
if v[i] == nil then
return false
end
end
return true
end
------------------------------------------------------------------------------------
-- isArrayLike
--
-- Returns true if the given value is iterable and all keys are consecutive
-- integers starting at 1.
------------------------------------------------------------------------------------
function p.isArrayLike(v)
if not pcall(pairs, v) then
return false
end
local i = 0
for _ in pairs(v) do
i = i + 1
if v[i] == nil then
return false
end
end
return true
end
------------------------------------------------------------------------------------
-- invert
--
-- Transposes the keys and values in an array. For example, {"a", "b", "c"} ->
-- {a = 1, b = 2, c = 3}. Duplicates are not supported (result values refer to
-- the index of the last duplicate) and NaN values are ignored.
------------------------------------------------------------------------------------
function p.invert(arr)
checkType("invert", 1, arr, "table")
local isNan = p.isNan
local map = {}
for i, v in ipairs(arr) do
if not isNan(v) then
map[v] = i
end
end
return map
end
------------------------------------------------------------------------------------
-- listToSet
--
-- Creates a set from the array part of the table. Indexing the set by any of the
-- values of the array returns true. For example, {"a", "b", "c"} ->
-- {a = true, b = true, c = true}. NaN values are ignored as Lua considers them
-- never equal to any value (including other NaNs or even themselves).
------------------------------------------------------------------------------------
function p.listToSet(arr)
checkType("listToSet", 1, arr, "table")
local isNan = p.isNan
local set = {}
for _, v in ipairs(arr) do
if not isNan(v) then
set[v] = true
end
end
return set
end
------------------------------------------------------------------------------------
-- deepCopy
--
-- Recursive deep copy function. Preserves identities of subtables.
------------------------------------------------------------------------------------
local function _deepCopy(orig, includeMetatable, already_seen)
if type(orig) ~= "table" then
return orig
end
-- already_seen stores copies of tables indexed by the original table.
local copy = already_seen[orig]
if copy ~= nil then
return copy
end
copy = {}
already_seen[orig] = copy -- memoize before any recursion, to avoid infinite loops
for orig_key, orig_value in pairs(orig) do
copy[_deepCopy(orig_key, includeMetatable, already_seen)] = _deepCopy(orig_value, includeMetatable, already_seen)
end
if includeMetatable then
local mt = getmetatable(orig)
if mt ~= nil then
setmetatable(copy, _deepCopy(mt, true, already_seen))
end
end
return copy
end
function p.deepCopy(orig, noMetatable, already_seen)
checkType("deepCopy", 3, already_seen, "table", true)
return _deepCopy(orig, not noMetatable, already_seen or {})
end
------------------------------------------------------------------------------------
-- sparseConcat
--
-- Concatenates all values in the table that are indexed by a number, in order.
-- sparseConcat{a, nil, c, d} => "acd"
-- sparseConcat{nil, b, c, d} => "bcd"
------------------------------------------------------------------------------------
function p.sparseConcat(t, sep, i, j)
local arr = {}
local arr_i = 0
for _, v in p.sparseIpairs(t) do
arr_i = arr_i + 1
arr[arr_i] = v
end
return table.concat(arr, sep, i, j)
end
------------------------------------------------------------------------------------
-- length
--
-- Finds the length of an array, or of a quasi-array with keys such as "data1",
-- "data2", etc., using an exponential search algorithm. It is similar to the
-- operator #, but may return a different value when there are gaps in the array
-- portion of the table. Intended to be used on data loaded with mw.loadData. For
-- other tables, use #.
-- Note: #frame.args in frame object always be set to 0, regardless of the number
-- of unnamed template parameters, so use this function for frame.args.
------------------------------------------------------------------------------------
function p.length(t, prefix)
-- requiring module inline so that [[Module:Exponential search]] which is
-- only needed by this one function doesn't get millions of transclusions
local expSearch = require("Module:Exponential search")
checkType('length', 1, t, 'table')
checkType('length', 2, prefix, 'string', true)
return expSearch(function (i)
local key
if prefix then
key = prefix .. tostring(i)
else
key = i
end
return t[key] ~= nil
end) or 0
end
------------------------------------------------------------------------------------
-- inArray
--
-- Returns true if searchElement is a member of the array, and false otherwise.
-- Equivalent to JavaScript array.includes(searchElement) or
-- array.includes(searchElement, fromIndex), except fromIndex is 1 indexed
------------------------------------------------------------------------------------
function p.inArray(array, searchElement, fromIndex)
checkType("inArray", 1, array, "table")
-- if searchElement is nil, error?
fromIndex = tonumber(fromIndex)
if fromIndex then
if (fromIndex < 0) then
fromIndex = #array + fromIndex + 1
end
if fromIndex < 1 then fromIndex = 1 end
for _, v in ipairs({unpack(array, fromIndex)}) do
if v == searchElement then
return true
end
end
else
for _, v in pairs(array) do
if v == searchElement then
return true
end
end
end
return false
end
------------------------------------------------------------------------------------
-- merge
--
-- Given the arrays, returns an array containing the elements of each input array
-- in sequence.
------------------------------------------------------------------------------------
function p.merge(...)
local arrays = {...}
local ret = {}
for i, arr in ipairs(arrays) do
checkType('merge', i, arr, 'table')
for _, v in ipairs(arr) do
ret[#ret + 1] = v
end
end
return ret
end
------------------------------------------------------------------------------------
-- extend
--
-- Extends the first array in place by appending all elements from the second
-- array.
------------------------------------------------------------------------------------
function p.extend(arr1, arr2)
checkType('extend', 1, arr1, 'table')
checkType('extend', 2, arr2, 'table')
for _, v in ipairs(arr2) do
arr1[#arr1 + 1] = v
end
end
return p