ಟೆಂಪ್ಲೇಟು:Gconvert
Usage
[ಬದಲಾಯಿಸಿ] | This template is being used to diagnose rounding tactics to improve the performance of Template:Convert. Do not delete this template without a legal AfD process, discussed to reach consensus. |
The Template:Gconvert is a variation of Template:Convert, intended for general-purpose conversions, where the amount being converted is exactly specified, rather than being a possible estimate. To round the results to another level, append a parameter "-2" or "2" (etc.) when using Gconvert.
- {{Gconvert|<num>|<unit>|<newunit>}}
- {{Gconvert|<num>|<unit>|<newunit>|2}} - show 2 decimals
- {{Gconvert|<num>|<unit>|<newunit>|-2}} - round hundreds
- {{Gconvert|<n>|<unit1>|<n2>|<unit2>|<newunit>}} -for 2 units
The parameters are identical to Template:Convert. The options include: abbr=off, abbr=on, sp=us, disp=/, disp=or, disp=s, disp=output number only, adj=on (explained below).
Parameters
[ಬದಲಾಯಿಸಿ]The following are the parameters handled by Template:Gconvert:
- Parameter 1 is the amount to convert, can contain commas or a formula.
- abbr=off - turns off abbreviation, shows "meters" or "feet" (default: abbr=on).
- sp=us - triggers U.S. spelling, shows "meters" else "metres" (default: sp=en).
- disp=/ - displays slash between numbers (default: disp=b).
- disp=s - displays slash between numbers (same as disp=/).
- disp=or - displays "or" between numbers (default: parentheses).
- disp=table - displays a hidden sort-tag for use in sortable tables.
- disp=output number only - displays only the resulting number.
- adj=on - turns on adjective-mode, shows "-m" (default: adj=off).
Those parameters are the same as in template {{Convert}}.
Examples
[ಬದಲಾಯಿಸಿ]- {{Gconvert|0.01|m}} gives: ೦.೦೧ metres (೦.೩೯೪ in)
- {{Gconvert|1.03|m}} gives: ೧.೦೩ metres (೩ ft ೫ in)
- {{Gconvert|3.6|m}} gives: ೩.೬ metres (೧೨ ft)
- {{Gconvert|5|kg}} gives: ೫ kilograms (೧೧ lb)
- {{Gconvert|8|km|abbr=on}} gives: ೮ km (೫ mi)
- {{Gconvert|33|kg}} gives: ೩೩ kilograms (೭೩ lb)
- {{Gconvert|83|kg}} gives: ೮೩ kilograms (೧೮೩ lb)
- {{Gconvert|180|km}} gives: ೧೮೦ kilometres (೧೧೨ mi)
- Heights
- {{Gconvert|32|m|ft}} gives: ೩೨ metres (೧೦೫ ft)
- {{Gconvert|200|m|ft}} gives: ೨೦೦ metres (೬೫೬ ft)
- {{Gconvert|200.3|m|ft}} gives: ೨೦೦.೩ metres (೬೫೭ ft)
- {{Gconvert|1,247|m}} gives: ೧,೨೪೭ metres (೪,೦೯೧ ft)
- {{Gconvert|6|ft|2|in|cm}} gives: ೬ feet 2 inches (೧೮೮ cm)
- {{Gconvert|6|ft|2|in|m}} gives: ೬ feet 2 inches (೧.೮೮ m)
- Altitudes
- {{Gconvert|8,848|m}} gives: ೮,೮೪೮ metres (೨೯,೦೨೯ ft) - Mount Everest
- {{Gconvert|8,848|±|0.4|m}} gives: ೮,೮೪೮ ± ೦.೪ metres (೨೯,೦೨೯ ± ೧ ft)
- Formulas and fractions
- {{Gconvert| 16*90 |kg|lb}} gives: ೧೬*೯೦ kilograms (೩,೧೭೫ lb) - math formula
- {{Gconvert|29*1,000 +29|ft|m}} gives: ೨೯ * ೧,೦೦೦+೨೯ feet (೮,೮೪೮ m)
- {{Gconvert| 16*90.1 |kg|lb}} gives: ೧೬*೯೦.೧ kilograms (೩,೧೭೮ lb)
- {{Gconvert| 16*90.1 |kg|lb|1}} gives: ೧೬*೯೦.೧ kilograms (೩,೧೭೮.೨ lb) - rounded 1 decimal
- {{Gconvert|1+1/8|mi|km}} gives: ೧ 1⁄8 miles (೧.೮ km)
- {{Gconvert|1/3|yd|m}} gives: 1⁄3 yard (೦.೩೦ m) - third of a yard
- {{Gconvert|1.01|ft|m}} gives: ೧.೦೧ feet (೦.೩೧ m)
- {{Gconvert|1.65*1.3333|ft|m|2}} gives: ೧.೬೫*೧.೩೩೩೩ feet (೦.೬೭ m)
- {{Gconvert|1,765*1,100|km|mi}} gives: ೧,೭೬೫*೧,೧೦೦ kilometres (೧೨,೦೬,೩೯೨ mi)
- {{Gconvert|10*pi|km|km}} gives: 10*pi km (31.415926535898 km) ← with pi
- {{Gconvert|10*pi*10|km|mi}} gives: ೧೦*pi*೧೦ kilometres (೧೯೫.೨೦೯೫೧೭೨೬೮೫ mi) ← circle area
- {{Gconvert|ln 10|km|km}} gives: ln 10 km (2.302585092994 km) ← natural log
- Both same units
- {{Gconvert| 8*27|kg|kg}} gives: 8*27 kg (216 kg) - both same units
- {{Gconvert| 4*5.5|kg|kg|disp=equals}} gives: 4*5.5 kg equals 22 kg
- {{Gconvert| 35*10|m|m|disp=output number only}} gives: 350
- {{Gconvert| 45*20|kg|kg|disp=output only}} gives: 900 kg
- Various display options
- {{Gconvert|89|cm|in|disp=/}} gives: ೮೯ centimetres / ೩೫ inches ← use slash
- {{Gconvert|100|lb|kg|disp=b}} gives: ೧೦೦ pounds (೪೫ kg) ← use parentheses
- {{Gconvert|55|mph|km/h|disp=or}} gives: ೫೫ miles per hour or ೮೯ kilometres per hour
- {{Gconvert| 627 |kg|disp=output number only}} gives: ೧,೩೮೨
- {{Gconvert| 350|L|USgal|disp=output only|abbr=on}} gives: ೯೨ US gal
- {{Gconvert| 3.785|L|USgal|disp=output only}} gives: ೧�೦೦೦ US gal
- {{Gconvert| 60 |mph|disp=output only|abbr=on|lk=on}} gives: ೯೭ km/h
- {{Gconvert| 0.622 |mph|disp=output only|abbr=off|lk=on}} gives: ೧.೦೦೧ km/h
Settings for precision
[ಬದಲಾಯಿಸಿ]For calculations made by Template:Gconvert, the numbers are assumed to be precise to the last digit. The converted result will be displayed to an equivalent precision. For example, the number "200" is treated as 199+1, so for distance: 200 metres (656 ft).
Features for simplicity
[ಬದಲಾಯಿಸಿ]Several features provide extra simplicity, beyond the operation of Template:Convert:
- Gconvert allows the input amount to be a formula: 75*84 + 13.5
- The input number (or formula) can contain commas: 1,500,175
- When both units are the same, it just calculates: {{Gconvert|6*137|ft|ft}} → 6*137 ft (822 ft)
- Gconvert validates parameters, such as: "Invalid parameter: abbr=nope, try abbr=on or abbr=off."
- Numbers are treated as precise to the last digit (so "200" is treated as 199+1, rather than being roughly 2 hundred rounded from 151-249). Gconvert considers 200 m as 656 ft, whereas Convert rounds as 660 ft.
- A space can precede the amount (spaces in Convert can cause: "Expression error...").
When changing from Gconvert to Template:Convert, then any commas or formulas, in the input amount, must be changed to simple numbers or fractions: 1/3 or 3/4. To use the same level of precision, add decimal point "." after numbers (such as "200." to indicate 199+1), when changing from Gconvert to Convert.
Limitations
[ಬದಲಾಯಿಸಿ]The following are potential issues:
- A tiny decimal less than 0.03 is rounded to 3 decimal digits.
- A formula can only contain division "/" for same-unit conversion, else treated as a fraction.
- A formula with "pi" (or "ln" natural logarithm) should start with a number, not pi.
- When changing from Gconvert to Convert, a leading blank before a number can cause the following message: "Expression error: Unexpected...". Write a number with no preceding space, as "627" (rather than " 627") if going back to Convert.